The DERC Piramid Type (DPT-nozzle) is designed for hard plugged tubes to a maximum pressure of 1500 bar/ 22K. The nozzle is protected against mechanical damage because the nozzle-holes are drilled in a groove of the nozzle-body. The innovative design gives the DPT-nozzle an optimal flow, better results and a longer life cycle. The DPT-nozzle is available in three diameters. The nozzle-body is corrosion resistant, hardened and guarantees a long life cycle.The nozzle will be configured and drilled for the job or according customer specifications.
According to your wishes with a short delivery time
The DPT-nozzle is a stock item with a short delivery time and an attractive price level. The nozzle will be optimally configured for your working conditions. Based on your requirements and specifications (such as pressure, pump capacity, use as pulling/ pushing or neutral, connection, thread, permissible reaction force and spray pattern) we advise you an optimal configuration.
M7x1
|
female
|
28 mm
|
Ø 10 mm |
DPT.07F.xxx
|
1/8" BSP
|
female
|
31.5 mm
|
Ø 12 mm
|
DPT.18F.xxx
|
1/4" BSP
|
female
|
36 mm |
Ø 16 mm |
DPT.14F.xxx
|
| Diameter |
500 bar/ 7K
|
1000 bar/ 15K
|
1500 bar/ 22K
|
Ø 0.4
|
1.36
|
1.92
|
2.36
|
Ø 0.5
|
2.13
|
3.01
|
6.68
|
Ø 0.6
|
3.06
|
4.33
|
5.30
|
Ø 0.7
|
4.17
|
5.89
|
7.22
|
Ø 0.8
|
5.44
|
7.70
|
9.43
|
Ø 0.9
|
6.89
|
9.74
|
11.93
|
Ø 1.0
|
8.51
|
12.03
|
14.73
|
About the standard DERC-nozzle range
The DPT-nozzle is one of the standard DERC nozzle range, an O.E.M. product from DERC Waterjetting. This line is designed with sustainable quality: a wide choice of configurations per nozzle, high efficiency, long life cycle due to design an used materials and good value for money. Check out the other nozzles from this range.
Like to know more about the DPT-nozzle?
Contact DERC Salotech +31 186 62 14 84.